HELP WITH SURFING:





PAGE MAIN CONTENTS

Tecnalia. Inspiring Business

Tecnalia. Inspiring Business

Mechanical Testing Laboratory

Mechanical testing lab is accredited to perform static and dynamic tests according to UNE-EN ISO / IEC 17025 standard, either at room or high and low temperature (tensile, fatigue, compression, hardness, impact Charpy tests, fracture mechanics...).

We can also perform singular tests, such as residual stresses testing, creep tests or instrumented/monitored tests.

The laboratory has its own workshop to machine devices and test specimens. This machining capacity is highly appreciated by customers and inspectors, for traceability and quality guaranty, as for shortening delivery time, while reduced deadlines delivery.

Mechanical Testing Laboratory

boton-serviciostecnologicos-en

tests

  • Tensile and compression tests at room temperature, in environmental chambers (from -70 ºC to +300 ºC) and in furnaces (up to 1100 ºC).
  • Brinell, Rockwell and Shore hardness tests.
  • Bend and Flexure Tests (from -70ºC to +300ºC).
  • Fracture Mechanics (CTOD, KIC, J, GIC...)
  • Axial Fatigue Tests, HCF, LCF (from -70ºC to 900ºC, depending on the type of test) and crack growth da/dN.
  • Multiaxial Fatigue Rig with actuators up to 10kN, 50kN and 100kN.
  • High Frequency Axial Fatigue (up to 250Hz).
  • Rotating bending fatigue.
  • Creep Tests
  • Charpy Impact Tests (from -90ºC to 300ºC, and at -196ºC)
  • Extensometry. Strain and Stress measurement by means of extensometric gauges.
  • Residual Stress Testing (RX and Hole Drilling)

equipment

  • Own machining workshop for devices and specimens.
  • Static and dynamic universal testing machines for tensile and compression testing.
  • Rockwell, Brinell and Shore Durometers.
  • Charpy pendulums for impact/resilience testing.
  • Environmental chambers (-70ºC to +300ºC).
  • Furnaces for universal testing machines (up to 1100ºC).
  • Rotating Bending fatigue machines.
  • Battery of machines for creep testing.
  • Multiaxial Rig for dynamic testing. 

ACCREDITATIONS AND RECOGNITIONS  

  • Management systems certification UNE-EN 9100:2010 for quality in the aeronautical/space/defence (ASD) industry.
  • ISO 14001 environmental management certification.
  • Accredited by ENAC acc. to UNE-EN ISO / IEC 17025 for Testing of Metallic Materials, Coatings and Sealants and Adhesives. Accreditation No. 4 / LE063.
  • Authorized by AIRBUS. Laboratory Control for Testing Baths Surface Treatment and Metallic Materials.
  • Approved laboratory by the ESA (European Space Agency) for "SMT Microsectioning" acc. to ECSS-Q-ST-70-38.
  • NADCAP Accreditation for Chemical Processing.
  • NADCAP Accreditation for Materials Testings.

                                 Access to our Acreditations and Recognitions.

 Acreditaciones IngenieríaMateriales_TECNALIA

Mechanical Testing LaboratoryMechanical Testing Laboratory

WEB HEADER

Tecnalia - Inspiring Business

SEARCH ENGINE



PAGE FOOTER

© 2019 Tecnalia. All rights reserved.

Parque Científico y Tecnológico de Bizkaia. Astondo Bidea, Edificio 700. E-48160 Derio. Bizkaia (Spain). Tel.: 902.760.000 - International Calls: (+34) 946.430.850


HELP WITH SURFING: